AirForce™ Blow Off Gun

From: $1,067.00

 
Model with Heater
Clear

• Steady-state DC ion emission using IsoStat® Technology, Usable up to ISO 14644 Class 4 Cleanrooms, and Intrinsically Balanced ±30V

Specs

DimensionSpecification
Discharge± 1000-100V 1.0 seconds @ 6″ (15.2cm), 30 PSI
Balance± 30V
Cleanroom ClassMeets ISO 14644-1 Class 4 (Fed Standard 209E Class 10)
Console Power24 VAC, 10W powered from wall transformer
LED IndicatorsGreen on both console and gun
Ion EmissionSteady State DC
Emitter PointsTungsten emitter points
Audible Noise70 dBA @ 1m, 30 PSI
Conducted EMI29 dubV; average level 100 KHz to 1.1 MHz
Ozone<0.005 ppm (typ)
Blow-off Force41g @ 30 PSI; Measured @ 3″ (7.6cm) from a 2″ (5.1 cm) diameter target
Air HoseStatic-dissipative polyurethane, 3/8″ outside diameter; 8 feet ( 2.4 meters) / 65 PSI
Gas Input20-65 PSI, Clean Dry Air or Nitrogen
Gas Connection1/4″ male industrial interchange quick disconnect
Gas Air Filter99.9% efficient, 0.01 micron or larger air particles; 99.9% coalescing efficiency
MountingMetal mounting plate attaches to back of console
EnclosureGun/console: static-dissipative polycarbonate (gun hanger 302 stainless steel);
optional outing stand for hands-free operation
DimensionsGun: 8 inches (length) x 3 inches (width) X 1 inch (depth) (20.3 X 7.6 X 2.5 cm);
Console: 8.5 inches (length) x 3 inches (width) x 1.6 inches (diameter)
(21.6 x 7.6 x 4.1 cm)
WeightGun: 12 oz (341g) with 8 foot (2.4m) air hose; Console: 11.5 oz (326g)
WarrantyTwo year limited warranty

Calibration


IsoStat technology guarantees that the AirForce is calibration-free and requires little maintenance when used with Clean Dry Air (CDA) or Nitrogen. When the air filter or emitter points need replacement, they snap in and out in less than a minute- reducing gun downtime and improving long-term performance. To avoid replacement costs, the AirForce is made from durable polycarbonate that holds up to high impact. The gun body, air hose and control console are static dissipative and ESD Safe.

IsoStat® Technology

Simco-Ion’s IsoStat® Technology is the first balancing technology for ionizers to guarantee intrinsically balanced ionization and elimination of complicated feedback circuits. IsoStat® is based on a law of physics, Conservation of Charge, which states that charge cannot be created or destroyed in an isolated system. By isolating the ionizer’s emitter points from ground, IsoStat® ensures equal numbers of positive and negative ions. Because of IsoStat®, your AirForce Gun will never need calibration and will require very little maintenance.

Reviews

There are no reviews yet.

Be the first to review “AirForce™ Blow Off Gun”

Your email address will not be published.

You may also like…