Nitrile Cleanroom Gloves

Name: Nitrile Cleanroom Gloves
SKU: 1083
Availability: InStock

SKU: N/A Categories: Apparel, Cleanroom Apparel

From: $28.04

Glove Size

Clear

Made with 100% clean and synthetic nitrile polymer (Acrylonitrile Butadiene).
Cleanroom Nitrile Gloves are powder-free, double chlorination, and DI water rinsable.
Gloves have micro-textured finger tips and are available in multiple sizes.
Packaged 100 gloves per double poly bag, Vacuum Sealed
Sold per 100 gloves
Clean to level 100.

SKU	Glove Size	Price	Qty Discount (10+)	Stock	Quantity	Add to cart
NPF100-12SC	Small	$28.04	$25.70	14	Nitrile Cleanroom Gloves quantity	Add to cart
NPF100-12MC	Medium	$28.04	$25.70	14	Nitrile Cleanroom Gloves quantity	Add to cart
NPF100-12LC	Large	$28.04	$25.70	8	Nitrile Cleanroom Gloves quantity	Add to cart
NPF100-12XLC	X-Large	$28.04	$25.70	10	Nitrile Cleanroom Gloves quantity	Add to cart

I don’t see what I am looking for:

Liquid particle count:

Proprietary processing for consistently reduced particle count at less than 1,200 particles/ cm²(for particle size 0.5 μm and above) Greater abrasion resistance than vinyl or latex for lower in use particle shedding.

Extractable Ionic Content:

Low levels of ionic and elemental extractable minimizes contamination of sensitive processes. Low levels of residual chemical reduce the risk of dermal reactions. Total extractable an-ionic content less than 1.0 mg/g. Surface Resistivity of less than 1 x 10¹⁰ ohms (ANSI / ESD STM 11.11)

Ftir/ Non Volatile Residual (IPA/HEXANE):

No silicone, Amides, or Phthalate (DOP) detected.

Handling and Storage:

They should be stored in a cool, dry place, located away from source of heat and light. Sold in 1000 glove cartons.

ESD Resistance	Decay Time	Tribo Charge	Test Method
< 1 x 10¹⁰ ohms / square	< 0.5 seconds	< 20 volts	ESD STM 11.11
Purity Specifications	Particles	Upper Limits	Test Method
	> 0.5 micron	< 2500 particles / cm²	IEST-RP-CC005.2
Purity Specifications	Particles	Upper Limits	Test Method
	DIW Extractant	< 1.6 mg/g	IEST-RP-CC005.2
	Non Volatile Residue (NVR)	< 3.5 mg/g	IEST-RP-CC005.2
Purity Specifications	Ions (< 50 ppm)		Test Method
Anions	Flouride	Chloride	IEST-RP-CC005.2
Nitrite	Cations	Lithium
Sodium	Potassium	Bromide
Phosphate	Nitrate	Sulphate
Ammonium	Magnesium	Calcium
Purity Specifications	Copper Corrosion		Test Method
	No Visible Discoloration		IEST-RP-CC005.2
Silicone oil, Amide, Phthalate (DOP) Presence	FT-IR		Test Method
	Not Detected		IEST-RP-CC005.2

Size	Length	Width
Small	11.5 inches	3.34 inches
Medium	11.5 inches	3.75 inches
Large	11.5 inches	4.15 inches
XL	11.5 inches	4.5 inches
2XL	11.5 inches	5 inches

Length is measured from tip of middle finger to cuff; width is measurement of the cuff opening. There is a 5mm margin of error.

Durability	Tensile Strength	Elongation at Fail	Test Method
Befor Aging	14 Mpa, Minimum	500% Minimum	ASTM D-4412 and D-573
After Aging	14 Mpa, Minimum	400% Minimum	ASTM D-4412 and D-573
Freedom of Holes		1.5 AQL	ASTM D-5151
Nominal Thickness		5 mil / 0.13 mm	ASTM D-3767 and D-6319
Nominal Length		12 inches/ 305 mm	ASTM D-3767 and D-6319