Aerostat® XC 2 Blower

From: $976.00

• Integrates with Simco-Ion’s patented Facility Monitoring System (FMS)
• Less than 12 second discharge times at 6 feet

Specs

DimensionSpecification
Input Voltage120 VAC, 60 Hz: 0.6A (fan high, heater off); 3.6A (fan high, heater on)
Input Current0.5A, 55W max (no heater); 3.5A, 420W
Discharge Time1.0 sec @ 1' (100-1000 high fan speed)
Balance 0±10V
Ion EmissionMicropulse AC Ionization
Emitter PointsStainless Steel
ControlsPOWER ON/OFF switch, WARM AIR ON/OFF switch,
FAN SPEED control LOW/MEDIUM/HIGH,
Emitter Point Cleaner Knob
Indicator LightsGreen POWER on, red FAULT alarm, red FAN STALL alarm
ConnectorsIEC AC Power Cord outlet, FMS Faut alarm output connector
Air Volume95 cfm (low), 150 cfm (high fan speed)
Heated Air Temp4-5F (2-3C) above ambient (measured at 12 feet in front of blower)
Audible Noise58 dB(low fan speed), 70 dB (high fan speed) measured at 2 feet in front of blower.
Cleanroom ClassMeets ISO 14644-1 Class 6 (Fed Std. 209E Class 1000)
OzoneLess than 0.05ppm, measured @ 1 foot in front of unit
Operating EnvironmentTemperature 50-95F (10-35C);
humidity 30-60% relative humidity, non-condensing
Audible AlarmFault and Fan Stall (Must select model with Alarm)
MountingPowder-coated steel stand with skid resistant rubber feet
Enclosure Powder-coated aluminum chassis
DimensionsInches: 14.13(W) x 7.2(H) x 6.550 in. (Depth); Centimeters: 35.9(W) x 18.3(H) x 16.60(D); with stand
Weight7 lb (3.2 kg) with stand

Micropulse Technology

The Aerostat XC2 utilizes MicroPulse technology applied to an emitter system for optimal performance. MicroPulse technology reduces ion recombination at the emitter, thus increasing production efficiency and performance. Using this breakthrough technology, the Aerostat XC2 maintains long-term peak performance and balance stability for extended periods between cleanings.

The only maintenance required for the Aerostat XC2 is periodic cleaning of the emitter points using the easy, built-in push button. The cleaning mechanism slides over the emitter points, removing any debris and ensuring balanced, continuous ion output.

Reviews

There are no reviews yet.

Be the first to review “Aerostat® XC 2 Blower”

Your email address will not be published.

You may also like…