Lightweight 8812 Series Garments

Categories: Apparel, Clothing, ESD Jackets, Static Control Tag: esd smocks

Manufactured to give the smock static shielding properties required by ANSI / ESD Association S20.20 standards for a “Static Control Garment”
Shield electronics from static on the human body
Lightweight
Made in lab coat (three-quarter) and jacket (waist) lengths
Available with V-Neck, Collar, Snap Cuff, and Knit Cuff designs
For a custom design, please contact our sales department at (937) 324-1100. We do require minimum quantities depending on the degree of customization (pockets, no pockets, etc.)

RFQ and more information:

Made in Compliance with ANSI/ESD S20.20 2014 and IEC 61340-5-1

Dimension	Specification	Test Method
Composition	88% Polyester 12% Carbon	ASTM D-629
Ounces Per Square Yard	2.2	ASTM D-3776-85
Surface Resistivity	6.98 x 10⁵ Ohms Square	GTM Initial
Charge Decay	0.5 seconds per 1000 volts	GTM
Finished Width	60	ASTM D-3774-89
Wales per Inch	36	ASTM D-3887-80
Courses per Inch	55
Wash Shrinkage Length	3	AATCC-135-1987
Wash Shrinkage Width	3	(1 (160˚) x 10) (Aiix10)
Grab Tensile Length	72	ASTM D-5034
Grab Tensile Width	50	ASTM D-5034
Trap Tensile Length	16	ASTM D-5735
Trap Tensile Width	7.5	ASTM D-5735
Elongation @ Break Length	57	ASTM D-5034
Elongation @ Break Width	127	ASTM D-5034
Stretch Length	7	ASTM D-4964 (5 lbs)
Stretch Width	50	ASTM D-4964 (5 lbs)
Flammability	Pass	16 CFR 1610
Colorfastness	Depending on Shade	AATCC

Whenever you clean an ESD smock in a washing machine, you are degrading the quality of it. If you are using an “industrial washing service” it may only last one wash. Most ANSI / ESD S20.20 certified smocks can be washed only 90 – 100 times when laundered properly.

• Machine Wash Cold or Warm
• Do not use Bleach
• Use only Non-Ionic Detergents
• Tumble Dry Low or Hang Dry

A “Static Control Garment” has < 1 x 10¹¹ ohms surface resistance measured point-to-point on the garment.