Nitrile Cleanroom Gloves

SKU: N/A Categories: ,

From: $225.82

  • Made with 100% clean and synthetic nitrile polymer (Acrylonitrile Butadiene).
  • Cleanroom Nitrile Gloves are powder-free, double chlorination, and DI water rinsable.
  • Gloves have micro-textured finger tips and are available in multiple sizes.
  • Packaged 100 gloves per double poly bag, Vacuum Sealed
  • Sold 10 bags / 1000 gloves per case
  • Clean to level 100.

SKU Glove Size Price Qty Discount (10+) Stock Quantity Add to cart

Out of stock

Out of stock


Out of stock

Out of stock


Out of stock

Out of stock


Out of stock

Out of stock

I don’t see what I am looking for:

Liquid particle count:

Proprietary processing for consistently reduced particle count at less than 1,200 particles/ cm2 (for particle size 0.5 μm and above) Greater abrasion resistance than vinyl or latex for lower in use particle shedding.

Extractable Ionic Content:

Low levels of ionic and elemental extractable minimizes contamination of sensitive processes. Low levels of residual chemical reduce the risk of dermal reactions. Total extractable an-ionic content less than 1.0 mg/g. Surface Resistivity of less than 1 x 1010 ohms (ANSI / ESD STM 11.11)

Ftir/ Non Volatile Residual (IPA/HEXANE):

No silicone, Amides, or Phthalate (DOP) detected.

Handling and Storage:

They should be stored in a cool, dry place, located away from source of heat and light. Sold in 1000 glove cartons.

ESD ResistanceDecay TimeTribo ChargeTest Method
< 1 x 1010 ohms / square< 0.5 seconds< 20 voltsESD STM 11.11
Purity SpecificationsParticlesUpper LimitsTest Method
> 0.5 micron< 2500 particles / cm2IEST-RP-CC005.2
Purity SpecificationsParticlesUpper LimitsTest Method
DIW Extractant< 1.6 mg/gIEST-RP-CC005.2
Non Volatile Residue (NVR)< 3.5 mg/gIEST-RP-CC005.2
Purity SpecificationsIons (< 50 ppm)Test Method
Purity SpecificationsCopper CorrosionTest Method
No Visible DiscolorationIEST-RP-CC005.2
Silicone oil, Amide, Phthalate (DOP) PresenceFT-IRTest Method
Not DetectedIEST-RP-CC005.2
Small11.5 inches3.34 inches
Medium11.5 inches3.75 inches
Large11.5 inches4.15 inches
XL11.5 inches4.5 inches
2XL11.5 inches5 inches

Length is measured from tip of middle finger to cuff; width is measurement of the cuff opening. There is a 5mm margin of error.

DurabilityTensile StrengthElongation at FailTest Method
Befor Aging14 Mpa, Minimum500% MinimumASTM D-4412 and D-573
After Aging14 Mpa, Minimum400% MinimumASTM D-4412 and D-573
Freedom of Holes1.5 AQLASTM D-5151
Nominal Thickness5 mil / 0.13 mmASTM D-3767 and D-6319
Nominal Length12 inches/ 305 mmASTM D-3767 and D-6319


There are no reviews yet.

Be the first to review “Nitrile Cleanroom Gloves”

Your email address will not be published. Required fields are marked *