M Series (Variable Speed)

  • HEPA Fan filter units clean and pressurize air flowing into a controlled environment.
  • We offer both Variable Speed and Three Speed models
  • Available in a range of operating voltages
  • Low Profile: All M Series Models are12-5/8” high
  • Standard Ceiling Size: All 2’ x 4’ models are designed to fit a nominal 2’ x 4’ ceiling grid with a 22.5” x 46.5” standard opening
  • Air Flow: Airflow ranges from 400 to 750 CFM for a 2 x 4 unit and 250 to 400 CFM for a 2 x 2 unit
  • Sound Level: At an average face velocity of 90 FPM measured 30” from the face of the filter, the sound level is approximately 54 dba with less than 45 dba ambient sound level.
  • RFQ and more information:

M Series HEPA fan filter units contain a 30% ASHRAE pleated type pre-filter on the top to stop large particles from coming into the cleanroom.

The energy efficient N310 motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 Volt (60 Hz).

Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% efficient and an ULPA grade 99.9995% efficient filter is available as an option.

The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille.

Low Profile: All M Series Models are12-5/8” high.

Standard Ceiling Size: All 2’ x 4’ models are designed to fit a nominal 2’ x 4’ ceiling grid with a 22.5” x 46.5” standard opening.

Air Flow: Airflow ranges from 400 to 750 CFM for a 2 x 4 unit and 250 to 400 CFM for a 2 x 2 unit. At 90 FPM, CFM is nominal 632 on a 2 x 4 and 300 on a 2 x 2 unit respectively. Airflow for units running at 50 Hz will be about 20% less.

Sound Level: At average face velocity of 90 FPM measured 30” from face of filter, sound level is approximately 54 dba with less than 45 dba ambient sound level. Field conditions, voltage and method of testing could produce different results.

Reviews

There are no reviews yet.

Be the first to review “M Series (Variable Speed)”

Your email address will not be published. Required fields are marked *

You may also like…

  • Grid

    Learn More
  • Curtains

    Learn More
  • Ceiling Lights

    Learn More